Industry News

Home / News / Industry News (Page 10)
  • Tooth surface defects ---- tearing

    Tooth surface defects ---- tearing

    04 Dec 2017

    The reason ?1) Uneven gear material ? 2) Tooth billet heat treatment improper method ? 3) The choice of cutting the amount of unreasonable and BUE generated ? 4) Cutting fluid is not high efficiency ? 5) Hob with blunt, not sharp ? Countermeasures 1)...

  • Pitch error accumulated error over tolerance

    Pitch error accumulated error over tolerance

    27 Nov 2017

    Hobbing machine table per revolution turn uneven maximum error is too large The reason: ? 1) Indexing worm gear transmission accuracy error ? 2) Table radial runout and face beating large ? 3) Sub-tooth exchange wheel meshing too loose or bump phenom...

  • Torsional error tolerance

    Torsional error tolerance

    20 Nov 2017

    Hob vertical feed direction and gear box bore axis direction deviation too much. When machining helical gears, there is additional movement is not correct (1) For machine tools and fixtures: a: column triangle rail and table axis is not parallel b: T...

  • Tooth angle is wrong

    Tooth angle is wrong

    13 Nov 2017

    The reason: ? 1) Hob? angle error is too large. ? 2) Hob grinding, the radial error of the front blade surface. ? 3) Hob mounting angle error. Countermeasures: ?1) reasonable choice hob accuracy. ? 2) control hob grinding quality. ? 3) Re-adjust the ...

  • Blade finishing

    Blade finishing

    06 Nov 2017

    The finishing steps are: ???1 that the blade has been grinding good (no spark), then do not give feed, let the knife reciprocate a few trips on their own, the number of trips depending on the length of the blade, short stroke less. ???2. Remove the b...

  • High speed steel tool material characteristics

    High speed steel tool material characteristics

    01 Nov 2017

    ?? High-speed steel is a high-alloy steel with the addition of tungsten, molybdenum, chromium, vanadium and other alloying elements. High-speed steel has a high strength, bending strength of the general carbide 2 to 3 times; toughness is also high, s...

足彩吧 25选5开奖走势图 北京十一选五基本走势 在线教育股票 上海时时乐万能六码走势图 福彩快三 什么原因导致股票下 贵州快三预测号推荐 大类配资 云南体彩11选5走势图 体彩排列三走势图带连线